How To Set Time On Sharp Alarm Clock

SHARP®

Instructions & Warranty

Thankyou for your buy of this quality clock. The utmost care has gone into the design and manufacture of your clock. Please read these instructions and store them in a rubber place for future reference.

• FEATURES:
  • Big 1.4" LED Display
  • Dual Alarm
  • High or Low Display Brightness
  • ix Minute Snooze
  • 9V Battery Support (Batery Not Included)

• Power SUPPLY
  • Begin past plugging in the power string into a standard household outlet. The brandish will flash indicating information technology needs to be set.
• 
  SETTING THE Fourth dimension
  • Press and hold the TIME push button down to activate time setting.
  • White holding downwardly the TIME button, press the Hr button to advance to the correct hr. The PM indicator volition light when the 60 minutes is advanced into the PM time.
  • While holding down the TIME push, press the Minute button to accelerate to the correct minute.
  • Release the Fourth dimension button when the correct time is shown on the display.
• 
  SETTING THE Alarm 1/2
  • Slide the Alert 1/2/DUAL slide switch to ALARM 1/2 position, and so press and hold the ALARM button to activate alarm ane/ii setting. The Alarm i/2 Indicator will low-cal when the alert 1/two setting is activated.
  • While the Alert 1/2/DUAL slide switch is on the ALARM ane/ii position and holding down the ALARM button, press the Hr button to advance to the correct hour. The PM Indicator volition low-cal when the hour is avant-garde into the PM time.
  • While the Alert ane/two/DUAL slide switch is on the Alert one/two position and holding downwards the Warning button, press, the Minute button to advance to the correct minute.
  • Release the Alert button when the correct alarm one/2 fourth dimension is shown on the display.
• 
  USING THE ALARM
  • Slide the Alert ON/OFF switch to the ON position, then slide the Warning 1/2/DUAL slide switch to choose using alarm one, alarm 2, or dual alert. The ALARM one indicator dot and ALARM2 Indicator dot will be lit co-ordinate to your choice. The warning will sound at the preset time.
  • Slide the Warning ON/OFF switch to the OFF position to deactivate the alarm. The Alarm Indicator dot volition no longer be visible.
• 
  USING THE SNOOZE
  • Pressing the SNOOZE/DIMMER push when the wake-up alarm is sounding will cause the alarm to stop and the warning will sound again in ix minutes. This will happen each time when the SNOOZE/DIMMER button is pressed.

PG i

• 
  USING THE DIMMER
  • While the alarm is non sounding, press the SNOOZE/DIMMER push to alter the Loftier or Depression seting to control the effulgence of the clock brandish. Note: The default is High setting.
• 
  BATTERY Support
  • Plough the clock over and insert a 9V battery as indicated to provide battery back up. The bombardment volition hold the ALARM and Fourth dimension settings until ability is restored. At that place will be no brandish under battery ability and the Warning will sound at the correct time. If at that place is no battery and the power is interrupted, the brandish will flash 12:00 and the Alarm and the TIME volition need to be reset.
• 
  CARE OF YOUR CLOCK
  • Replace the support battery annually, or store the clock without a battery when not in use. A soft cloth or a paper towel may be used to clean your clock. Do not use any corrosive cleaner or chemical solutions on the clock. Go on the clock clean and dry to avoid any problems.

For Client Service Please Telephone call Toll Free at
i-(800)-224-0131 and ask for Customer Service at x7546.
Mon-Friday 9:00 AM - 4:00 PM EST
Please call for assistance earlier returning the clock to the store.

1 Twelvemonth Limited Warranty

M.Z. Berger & Company warrants the original consumer purchaser of this product that information technology shall be complimentary of defects in materials and workmanship for one yr from the buy date of this product. Defects caused past tampering, improper use, unauthorized modifications or repairs, immersion in h2o or abuse are not covered by this warranty. If a defect covered by this warranty occurs during the warranty period, wrap your clock carefully and send it to the following accost:

MZ Berger Service Center
29-76 Northern Boulevard
Long Isle City, NY 11101

Yous must include a Proof of Purchase, either the original receipt or a photocopy and a check or money order for USD $iii.00 to cover the toll of handling. Also include your return address inside the package. M.Z. Berger will repair or replace the clock and return information technology to y'all. M.Z. Berger will not be liable for any loss or damage, including incidental or consequential damages of any kind; from any breach of warranty either expressed or implied relatihg to the product. Since some states practice not allow the exclusion or limitation of incidental or consequential damages, this limitation may not apply to you.

Printed in Prc

Model SPC597

Precipitous, registered in the U.South. Patent and Trademark Office.

PG 2

Of import SAFETY INSTRUCTIONS

1. Read these instructions--All the prophylactic and operating instructions should be read earlier this product is operated.
2. Keep these instructions--The safety and operating instructions should be retained for future reference.
3. Heed all warnings--All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions--All operating and apply instructions should be followed.
5. Do not use this apparatus near water--The apparatus should not exist used well-nigh water or moisture--for case, in a moisture basement or near a swimming puddle, and the like.
6. Clean only with a dry out cloth.
7. Practise not block any ventilation openings. Install in accordance with the industry's instructions.
8. Do not install near whatever estrus sources such as radiators, estrus registers, stoves, or other appliance (including amplifiers) that produce estrus.
9. Do not defeat the safety purpose of the polarized or grounding-blazon plug. A polarized plug has 2 blades with ane wider than the other. A grounding type piug has two blades and a third grounding prong. The wide blade or the third prong are provided for your prophylactic. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched especially at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
11. Only employ attachments/accessories specified by the manufacturer.
12. Unplug the apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified personnel. Servicing is required when the appliance has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects accept fallen into the apparatus has been exposed to pelting or moisture, does not operate unremarkably, or has been dropped.
14. Delight keep the unit in a adept ventilation environment.
15. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the take chances of electrical shock, do not perform whatever servicing other than that independent in the operating instructions unless yous are qualified to do and so.

Alert: The mains plug is used equally disconnect device, the disconnect device shall remain readily operable.
Ξ This equipment is a Class Ii or double insulated electric appliance. Information technology has been designed in such a way that it does not require a safety connection to electrical globe.
Practise not install this equipment in a bars or building-in space such as a book case or similar unit, and remain a well ventilation weather. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.

WARNtNG: The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on appliance.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Alert: The bombardment shall not be exposed to excessive heat such as sunshine, fire or the like.

PG 3

DIGITAL Alert CLOCK

This lightning flash and arrowhead within the triangle is a warning sign alerting yu of "dangerous voltage" inside the product.

Circumspection RISK OF Electrical SHOCK DO Not Open up CAUTION: TO REDUCE THE Run a risk OF Electric SHOCK, DO Not REMOVE Embrace (ON BACK). NO USER SERVICEABLE PARTS Within. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The assertion point within the triangle is a warning sign alerting you of important instructions accompanying the product.

Warning: TO REDUCE THE RISK OF FIRE
OR ELECTRIC Stupor, Practice Non EXPOSE
THIS Apparatus TO RAIN OR Wet.

CAUTION: TO Preclude ELECTRIC Stupor Do NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD;:RECEPTACLE,:OR
OTHER OUTLE~MSS.::fHEBLADES'CAN BE FUI LY INSERTED
TO Forbid Blade EXPOSURE.

Please read this before operating your unit.

This device compiies with Part xv of the FCC Rules. Operation is subject field to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired functioning.

Notation: This equipment has been tested and institute to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection confronting harmful interference in a residential instal!ation, Thia equipment generates, uses. and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a item installation. If this equipment does cause harmful interference to radio or television reception, which can be determined past turning the equipment off and on, the user is encouraged to try to correct the lntetference past one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increment the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a excursion different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/0/ technician for assist.

PG 4

Source: http://www.lynchjim.com/Documentation/Household/clock_sharp_01.html

Share this post